The Spearpoint Paring Knife blank will make a handy small knife. Features a 3" blade, with a 7" overall length. Forged from .062" thick stainless steel by America's oldest cutlery, Russell Green River, for I.R.T. Properly tempered to sharpen quickly and hold an edge.
Blade is 3", with a overall length of 7". Forged from .062" thick stainless steel.
We recommend three (3) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet heads flush with the surface. Order our #DRILL-PCB-5.
Blade is 3", with a overall length of 7". Forged from .062" thick stainless steel.
We recommend three (3) #RIVET-5 brass rivets. Use our Piloted Counterbore to seat the rivet heads flush with the surface. Order our #DRILL-PCB-5.
BOOK-BKA
Basic Knife Assembly,
19 page color pamphlet,
by Ryan & Roger Gale
DRILL-21
drill bit, HSS, Number 21, .1590" diameter, tap drill 10-32 thread
DRILL-PCB-5
Piloted Counter Bore,
5/16" diameter, No. 21 pilot,
for wood, bone, or similar materials,
ideal for use with our cutler's rivets
KP-BONE-S
Bleached bone knife handle scales,
two scales
1/4" x 1-1/4" x 5"
KP-CHERRY-S
Cherry knife handle scales,
two scales
3/8" x 1-1/2" x 5"
KP-MAPLE-S
Curly maple knife handle scales,
two scales
3/8" x 1-1/2" x 5"
KP-WALNUT-S
American black walnut knife handle scales,
two scales
3/8" x 1-1/2" x 5"
RIVET-5
Cutler's Rivet, brass, single,
one male and one female part.
Use our #DRILL-PCB-5 piloted counter bore
to seat the rivet heads flush.
SHEATH-FT
Neck Sheath,
for a medium knife,
accepts blades up to 3-3/4" length
Adobe Reader required to view the files below.
page_076.pdf
Last updated: 4/25/2012 (114 KB)